교수진
2004.3 ？ 2008.2 : 서울대학교 지구환경시스템공학부 공학사
2008.9 - 2010.8 : 서울대학교 에너지시스템공학부 공학석사
2010.9 - 2017.8：서울대학교 에너지시스템공학부 공학박사
2017.9 ？ 2020.10 : 서울대학교 에너지자원신기술연구소 박사후연구원
2020.11 ？ 2021.2 : 한국원자력연구원 박사후연구원
-암반의 물리적, 역학적 특성 평가
-지하공간 및 암반 내 에너지자원 저장
-암반기계굴착 및 암석절삭
-지하공간건설 및 광물자원개발 자동화
등록된 내용이 없습니다.
● H.Y., Jeong, B.K., Jeon, S.B., Choi, S. Jeon, 2020, Fracturing behavior around a blasthole in a brittle material under blasting loading, International Journal of Impact Engineering, 140, 103562.
● H.Y., Jeong, S.B., Choi, S.W., Jeon, 2020, Effect of skew angle on the cutting performance and cutting stability of point attack type picks, Tunnelling and Underground Space Technology, 103, 103507.
● H.Y., Jeong, S.B., Choi, S.D., Lee, S. Jeon, 2020, Rock Cutting Simulation of Point Attack Picks Using the Smooth Particle Hydrodynamics Technique and the Cumulative Damage Model, Applied Sciences, 10(15), 5314.
● S.B., Choi, H.Y., Jeong, D.S., Cheon, S.W., Jeon, 2020, Applicability of artition Approximation Source Locating Technique for a Transversely Isotropic Medium, Episodes, 43(4), 991-1002.
● Hoyoung Jeong, Yudhidya Wicaksana, Sehoon Kim, Seokwon Jeon, 2020, Fundamental study on rock cutting by an actuated undercutting disc, Tunnel and Underground space, Vol. 30(6), 591-602.
● S.B. Choi, S.D., Lee, H.Y., Jeong, S., Jeon, Development of a New Method for the Quantitative Generation of an artificial joint specimen with specific geometric properties, Sustainability, Vol. 11 (2), 373.
● Hoyoung Jeong, Seungbum Choi, Seokwon Jeon, 2019, Current status of rock cutting technique using undercutting concept, Tunnel and Underground Space, Vol. 29(3), pp. 148-156.
● Hoyoung Jeong, Mincheol Kim, Minwoo Lee, Seokwon Jeon, 2019, Analysis of advanced rate and downtime of a shield TBM encountering mixed ground and fault zone: a case study, Tunnel and Underground space, Vol. 29(6), pp. 394-406.
● H.Y., Jeong, S. Jeon, 2018, Characteristic of size distribution of rock chips produced by rock cutting with a pick cutter, Geomechanics and Engineering, Vol. 15 (3), pp. 811-822.
● Nan Zhang, Hoyoung Jeong, Seokwon Jeon, 2018, Development and research trends of TBM manufacturing technology in China, Journal of society for mineral, energy, and resources engineering, Vol. 55(4), pp. 314-322.
● Shahabedin Hojjati, Hoyoung Jeong, Seokwon Jeon, 2018, Prediction model for specific energy of conical cutters based on gene expression programming and particle swarm optimization, Tunnel and Underground Space, Vol. 28(6), pp. 651-669.
● Youngmin Yoon, Hoyoung Jeong, Seokwon Jeon, 2018, Review of pre-grouting methods for shield TBM tunneling in difficult grounds, Tunnel and Underground Space, Vol. 28(6), pp. 528-546.
● Hoyoung Jeong, Seokwon Jeon, 2018, Linear cutting machine test for assessment of the cutting performance of a pick cutter in sedimentary rocks, Journal of Korean Tunnelling and Underground Space Association, Vol. 20(1), pp. 161-182.
● Hoyoung Jeong, Nan Zhang, Seokwon Jeon, 2018, Review of technical issues for Shield TBM tunneling in difficult grounds, Tunnel and Underground Space, Vol. 28(1), pp. 1-24.
● H.Y., Jeong, J.W., Cho, S., Jeon, J., Rostami, 2016, Performance assessment of hard rock TBM boreability using punch penetration test, Rock Mechanics and Rock Engineering, Vol. 49 (4), pp. 1517-1532.
● Ho-Young Jeong, Sudeuk Lee, Seokwon Jeon, 2014, Estimation of design parameters of TBM using punch penetration and Cerchar abrasiveness test, Journal of Korean Tunnelling and Underground Space Association, Vol. 16(2), pp. 237-248.
● J.W., Cho, S. Jeon, H.Y., Jeong, S.H Chang, 2013, Evaluation of cutting efficiency during TBM disc cutter excavation within a Korean granitic rock using linearcutting-machine testing and photogrammetric measurement, Tunnelling and Underground Space Technology, Vol. 35, pp. 37-54.
● Ho-Young Jeong, Seokwon Jeon, Jung-Woo Cho, 2013, A numerical study on rock cutting by a TBM disc cutter using SPH code, Journal of Korean Tunnelling and Underground Space Association, Vol. 15(3), pp. 345-356.
● Sudeuk Lee, Ho-Young Jeong, Seokwon Jeon, 2012, Determination of Rock Abrasiveness using Cerchar Abrasiveness Test, Tunnel and Undeground Space, Vol. 22(4), pp. 284-295.
● Ho-Young Jeong, Seokwon Jeon, Jung-Woo Cho, 2012, A study on Punch Penetration Test for Performance Estimation of Tunnel Boring Machine, 2012, Tunnel and Underground Space, Vol. 22(2), pp. 144-156.
● Ho-Young Jeong, Seokwon Jeon, Jung-Woo Cho, Soo-Ho Chang, Gyu-Jin Bae, 2011, Assessment of Cutting Performance of a TBM Disc Cutter for Anisotropic Rock by Linear Cutting Test, Tunnel and Underground Space, Vol. 21(6), pp. 508-517.
암석역학연구실